To perform a new install of Windows XP:
Insert your XP CD in the drive. It should automatically launch the Setup routine. If it doesn’t, click Start -> Run, type d:\setup.exe (where d: is the letter of your CD drive) in the Open box and click OK.
You’ll be presented with a menu of choices. Click Install […]
To perform a new install of Windows XP:
Insert your XP CD in the drive. It should automatically launch the Setup routine. If it doesn’t, click Start -> Run, type d:\setup.exe (where d: is the letter of your CD drive) in the Open box and click OK.
You’ll be presented with a menu of choices. Click Install […]
Now follow the following steps.
1) Make sure CD-Rom is first Boot Device in your Bios
2) Insert your Windows 2000 CD
3) Once this is done boot up using CD-Rom Drive.
( If your Hard drive is not setup then this is automatic, if not you will see “Hit any Key to Boot From CD-Rom” on the […]
Well for this I will show you the install for Microsoft Windows NT 4.0. Now follow the following steps.
Insert your Windows NT 4.0 CD and Disk 1 of your 3 NT Workstation setup disks
Once this is done boot up system.
The following “Hardware Configuration” will appear and Windows NT will detect your hardware […]
What you will require to do this walkthrough is
A Windows 98 CD
A Computer
Your Chosen CD-Rom Boot Media
The Microsoft Windows 98 Install will prepare to run a system check, after you have completed the routine for your CD-Rom boot and running the setup.exe file. Press enter to run the scandisk.
The “Windows 98 Setup” […]
What you will require to do this walkthrough is
A Windows ME CD
A Computer
Your Chosen CD-Rom Boot Media
Your Chosen Method
The Microsoft Windows ME Install will eventually run Scandisk, let this complete, if you exit windows will not allow you to complete the install of Windows ME.
The “Welcome to ME Setup” screen will […]
What you will require to do this walkthrough is
A Windows 95 CD
A Computer
Your Chosen CD-Rom Boot Media
The Microsoft Windows 95 Install will prepare to run a system check, after you have completed the routine for your CD-Rom boot and running the setup.exe file. Press enter to run the scandisk.
The “Windows 95 Setup” […]
Well for this I will show you the install for Microsoft Windows 3.1. Now follow the following steps.
Install MSDOS first using the 3 install disks.
Once this is done boot up using hard drive.
Now go to the A: prompt by typing A: and hitting enter
Now type Setup
The “Welcome to Setup” screen […]